A polymer modified, thin-set tile adhesive for ceramic tiles, in internal areas. It is suitable for both vertical (wall) and horizontal (floor) application, over the cementitious substrate. It is supplied as a dry-mix mortar, to which water needs to be added before application. C1T certified.
Available in : 20kg bag
Ready to mix
Self curing
Easy to use
High compressive strength
Good coverage
High bond strength
High durability
Do not use on the wet screed. The surface must be fully cured.
Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and webertec crete for the same.
Can be used in internal areas, for the floor as well as wall application.
Low VOC - for healthy living.
No hacking of the substrate required to achieve the required bonding.
The free-flowing product makes it easier to mix and apply.
No-sag formula: provides for hassle-free application on vertical walls, without any slippage.
Very low shrinkage prevents de-bonding and gives longer life to tiles.
Useful for bed thickness of 3 - 12 mm. May go up to 15 mm in a limited extent.
