Weber pearl armour (translucent) epoxy

Part A: Part B - 11.5 : 1 by weight

Part A: Part B - 7 : 1 by volume

Can be used where minimum joint width is 1 mm.

Can be used where maximum joint width of 7 mm in vertical and 14mm in horizontal.

Do not use the grouts in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.

For at least 7 days days after grouting, for acid cleaning & submerged conditions

Highly dense, even, compact and a smooth finish results into nonabsorbent, water resistant surface which prevents the growth of bacteria and fungus.

Easy to mix with a creamy consistency which helps in faster application and ease in cleaning.

Very low in shrinkage and high resistance to cracks.

Excellent chemical & stain resistant properties.

No-sag resistance formula for wall & floor applications.

High mechanical strength which results in long durability of the grouts.

It can resist most of commercial cleaners which are used regularly for cleaning tile and stone.

Two components pre weighed & ready to mix.

Being translucent in nature, it can be used for fixing glass blocks and areas were background light is desired which cannot be achieved with a cementitious & resin adhesive.

Very low in volatile organic compounds which allows it to be to be used in green buildings

When applied in between tile and stone will result in invisible grouts unlike cementitious and common epoxy grouts.

High bonding strength with tiles and stones.

High translucency increases the chromatic effect resulting into highly aesthetic and decorative finish.

It can withstand heavy traffic and weathering conditions.

No color shading even when used in wet and submerged conditions.