Weberset firm
A highly polymer modified, high-performance thin-set adhesive, for tiles, mosaics and stones, on a variety of surfaces, for both vertical and horizontal application, in indoor as well as outdoor use. It is supplied as a dry mix mortar, to which water needs to be added before application. C2TE certified.
Available in : 20 kg bag (grey & white)
Advantages :
Ready to mix
Self curing
Wall cladding
Tile on tile
High compressive strength
Submerged conditions
High bond strength
High durability
Points to consider
Do not use on wet screed or plaster. The surface must be fully cured.
Can only be used on cementitious waterproofing. Don’t use on epoxy or polyurethane waterproofing.
Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact us for fixing these.
Do not use on surfaces subject to vibrations. Use weberset flex for vibration prone areas.
Do not use for fixing artificial stone or impregnated stone. Use weberset ultra for the same.
Features
Internal and external use.
Highly polymer-modified: provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
Can be used for new construction, as well as for renovation over existing floors/facades.
Long open time.
Prolonged and easy workability.
Low VOC - for healthy living.
No Hacking of substrate required to achieve the required bonding.
Self-curing properties
The free-flowing product makes it easier to mix and apply.
No-sag formula: allows for hassle-free application on vertical walls, without any slippage.
Water-resistant, making it suitable for swimming pools, bathrooms, kitchen, saunas, and spa.
Sustains heat ageing, making it ideal for high-temperature locations for outdoor use, and also for hot temperature applications, like Jacuzzi, sauna etc.
No shrinkage prevents debonding and gives longer life to tiles and stones.
Absorbs dynamic load.
Useful for bed thickness of 3 - 12 mm. May go up to 15 mm in a limited extent.